Free tools that run in your browser. Use any tool without an account.

Favourites Cart
Sign in
Join free

Polygon Area Calculator

  • Free
  • Runs in your browser
  • No account needed

Calculate area, perimeter, apothem, circumradius and interior angles for regular polygons or from corner coordinates; for example a regular hexagon with side 5 cm has area 64.95 cm2 and perimeter 30 cm.

Area
10.3923 square units
Perimeter
12 units
Apothem (centre to middle of a side)
1.7321 units
Circumradius (centre to a corner)
2 units
Each interior angle
120 °

The shoelace formula needs a simple polygon: sides that do not cross each other.

Runs in your browser. Your files and values are not sent to us. Report a problem
Advertisement

About the Polygon Area Calculator

You can compute polygon measures two ways: regular polygon mode or from corner coordinates. Use regular mode when all sides equal. Use coordinate mode to paste vertices one per line in order. The tool runs in your browser and updates results as you type. Nothing is uploaded to a server and no account is required. The tool returns area, perimeter, apothem, circumradius and each interior angle for regular polygons. For coordinate polygons it uses the shoelace formula; make sure the polygon is simple and vertices follow the boundary order. You can copy results or share a link that reopens the same numbers. This makes the tool fast for classroom work, quick site checks, and small design tasks where you want instant, local calculations.

How to use it

  1. 1Choose mode: Regular polygon or Any polygon from corner coordinates
  2. 2Enter number of sides and side length for regular mode, or paste x,y corners one per line
  3. 3Pick the unit (mm, cm, m, inches, feet, or any unit)
  4. 4Read Area, Perimeter, Apothem, Circumradius and Each interior angle which update instantly
  5. 5Copy results or share the link that reopens with your numbers
Advertisement

Worked example

Regular polygon example: n = 6 (hexagon), side s = 5 cm. Results: Area = 64.9519052838 cm2 (64.95 cm2), Perimeter = 30 cm, Apothem = 4.3301270189 cm, Circumradius = 5 cm, Interior angle = 120°.

The formula

Regular polygon with n sides of length s: area = n s^2 / (4 tan(180° / n)), apothem = s / (2 tan(180° / n)), interior angle = (n - 2) x 180° / nAny polygon from its corners (shoelace formula): area = |sum of (x_i y_(i+1) - x_(i+1) y_i)| / 2, going round the corners in order

Source: Shoelace formula - WikipediaKarney (2013) - Algorithms for geodesics (Geodesic polygon area). Last checked 6 November 2026.

What it is good for

  • Works offline in your browser; nothing uploaded
  • Updates results instantly as you type; no calculate button
  • Supports regular polygons and coordinate input with copy and share link
  • Coordinate mode uses planar shoelace only; it needs a simple polygon with no crossing sides
  • This tool does not compute geodesic area on the ellipsoid for raw lat/long coordinates
Advertisement

Questions people ask

Does vertex order matter when I paste coordinates?

Yes. List vertices in boundary order, clockwise or counterclockwise. Wrong order can make the polygon self-cross or produce a signed area with the wrong sign.

Can I paste GPS lat/long points and get correct ground area?

Not directly. Raw degrees fed to the shoelace formula give wrong ground areas. Use a geodesic method or project coordinates into a metre-based CRS for accurate ground area.

How do I handle polygons with holes?

The tool measures a single outline only. Compute the outer ring area and subtract hole areas manually, or use GIS software that supports multipolygons and holes.

What units can I use?

Enter any linear unit for side lengths and coordinates (mm, cm, m, inches, feet, or others). The area units follow by squaring the input unit (for example m gives m2).

What if my polygon sides cross each other?

The shoelace formula requires a simple polygon. If sides cross you may get an incorrect area or a signed result that cancels parts of the shape. Reorder or split the polygon first.

Are results exact?

Results are computed with standard floating point arithmetic. For regular polygons the formulas give mathematically exact expressions; numeric results are rounded for display.

Help keep every tool free

FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.

Advertisement
Advertisement