About the Surface Area Calculator
This tool computes surface area for seven common solids: cube, rectangular box (cuboid), sphere, solid hemisphere, cylinder, cone and square pyramid. You pick a shape, enter dimensions and a unit, and results update instantly in your browser. The tool shows total surface area, curved or lateral area, base area and slant height where relevant. Nothing you type leaves your device; the page runs client-side and does not upload your numbers to a server. Results match the standard formulas used in textbooks and online references such as Wikipedia and MathWorld. You can copy any numeric result or create a share link that reopens the tool with your inputs already filled.
How to use it
- 1Pick a shape from the list.
- 2Enter the dimension values (side, length, width, radius or height).
- 3Choose the unit (mm, cm, m, inches, feet or any unit).
- 4Watch total, lateral, base areas and slant height update as you type.
- 5Copy a result or share a link that reopens with your numbers.
Worked example
Shape: Cylinder. Inputs: radius r = 3 cm, height h = 5 cm, unit = cm. Results: Lateral area = 2 pi r h = 2 pi * 3 * 5 = 30 pi cm^2 (about 94.25 cm^2). Base area = 2 pi r^2 = 18 pi cm^2 (about 56.55 cm^2). Total surface area = 48 pi cm^2 (about 150.80 cm^2).
The formula
Cube 6a^2Box 2(lw + lh + wh)Sphere 4 pi r^2Solid hemisphere 3 pi r^2 (curved 2 pi r^2 plus the flat circle)Cylinder 2 pi r^2 + 2 pi r hCone pi r^2 + pi r l, with slant l = sqrt(r^2 + h^2)Square pyramid a^2 + 2 a s, with slant s = sqrt((a/2)^2 + h^2)Source: Surface area - WikipediaSphere - MathWorld (Wolfram). Last checked 5 November 2026.
What it is good for
- Instant updates as you type, no calculate button.
- Shows total, lateral (curved) and base areas separately.
- Copy results or share a link that reopens with your inputs.
- Supports only the seven listed shapes; it does not handle frustums, capsules or ellipsoids.
Questions people ask
What is surface area?
Surface area is the total area of the outside faces or curved surface of a 3D shape. You measure it in square units like cm^2 or m^2.
What is the difference between total and lateral surface area?
Total surface area includes every outside face of the solid. Lateral surface area covers only the sides or curved surface and excludes base areas.
Do I need to convert units before using the tool?
Yes. Enter all linear measurements in the same unit so the output is correct. The result will be in that unit squared, for example m^2 or in^2.
How does the tool compute a cone's surface area?
The tool uses total area = pi r^2 + pi r l, where l is the slant height. If you give height h, it computes l = sqrt(r^2 + h^2) first and then evaluates the formula.
Is the hemisphere result the curved area or the full surface?
The tool reports both the curved (lateral) area and the total for a solid hemisphere. It uses curved = 2 pi r^2 and total = 3 pi r^2, which includes the flat circular base.
Can I save or share my calculation?
Yes. You can copy numeric results to the clipboard or create a share link. The share link reopens the page with the same shape and values already filled in.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.