About the Paint Calculator
This free browser tool estimates how much paint you must buy for a room. You type length, width, height, door and window counts, coats, coverage and tin or can size. The tool runs in your browser; nothing is uploaded. Results update instantly as you type and you can copy the result or share a link that reopens with your numbers. The calculator uses a fixed method: wall area equals 2 × (length + width) × height, subtracting 1.89 m2 per door and 1.44 m2 per window, and adding the ceiling area only if you choose to paint it. The tool then divides area × coats by the coverage you enter and rounds up to whole tins or cans. Use the product label coverage and buy a little extra for touch-ups.
How to use it
- 1Enter units then room length and width.
- 2Enter wall height and count doors and windows.
- 3Choose whether to paint the ceiling and set coats and coverage.
- 4Pick a tin or can size and read the instant results.
Worked example
Room: 4.0 m × 3.5 m, height 2.4 m, doors 2, windows 1, walls only, coats 2, coverage 10 m2/L. Wall area after doors and windows = 30.78 m2. Total area for one coat = 30.78 m2. Paint needed = 30.78 × 2 ÷ 10 = 6.156 L. If you choose 2.5 litre tins you must buy 3 tins (3 × 2.5 = 7.5 L).
The formula
Wall area = 2 x (length + width) x height - 1.89 m2 (21 sq ft) per door - 1.44 m2 (15 sq ft) per windowAdd length x width for the ceilingPaint = area x coats / coverage per coat, rounded up to whole tins or cansSource: WallPaintCalculator methodologyFreeToolr Paint Calculator. Last checked 13 November 2026.
What it is good for
- Fast browser calculation with no file uploads.
- Instant updates as you type and a shareable link.
- Shows paint volume, tins or cans, and adjusted wall area.
- This gives a rough estimate only; surface texture and colour affect coverage.
- It does not optimise cost across multiple container sizes or include primer separately.
Questions people ask
How does the calculator subtract doors and windows?
The tool uses standard defaults: 1.89 m2 per door and 1.44 m2 per window. You can leave those in to avoid overbuying, or adjust your inputs for non standard openings.
What coverage number should I use?
Use the coverage figure printed on the paint tin for best accuracy. Typical US interior latex covers about 350 to 400 ft2 per US gallon (about 8.6 to 9.8 m2 per litre).
Should I paint the ceiling with the walls?
Only include the ceiling if you plan to paint it. If you add the ceiling, the calculator adds length × width to the paintable area for each coat.
How many coats should I enter?
Two finish coats are common for an even result. Enter any primer or extra coats separately because primer often has different coverage.
Does the calculator round up for tins and cans?
Yes. After it computes litres or gallons required, it rounds up to whole tins or cans based on the size you choose, for example 2.5 L tins or 1 gallon cans.
How much extra paint should I buy for touch-ups?
Many people add about 5 to 10 percent extra for touch-ups and waste. This tool does not add that automatically, so increase your coverage or tins accordingly.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.