About the Cone Volume Calculator
This tool computes properties of a right circular cone from the base radius and the vertical height. You choose units such as mm, cm, m, inches, feet or any unit; the tool keeps the same unit for area and volume outputs and shows capacity in litres. Results update instantly as you type; there is no calculate button. You can copy a result or share a link that reopens the tool with your numbers. The calculator runs entirely in your browser and nothing is uploaded. Use it for homework, quick checks, shop measurements, or estimating small tank volumes. It shows the volume, slant height, curved surface area and total surface area so you do not need extra steps to get common cone measures.
How to use it
- 1Enter the base radius and pick the unit (mm, cm, m, inches, feet or any unit).
- 2Type the vertical height in the same unit.
- 3Watch the volume, litres, slant height, curved area and total area update instantly.
- 4Copy the result or share the generated link to reopen with the same inputs.
Worked example
Example: r = 10 cm, h = 20 cm. Volume V = (1/3)·π·10^2·20 = 2094.3951 cm3 (2.094 L). Slant height l = sqrt(10^2 + 20^2) = 22.3607 cm. Curved area = π·10·22.3607 = 702.6547 cm2. Total surface area = 702.6547 + 314.1593 = 1016.8139 cm2.
The formula
Volume V = (1/3) x pi x r^2 x h, a third of the cylinder with the same base and heightSlant height l = sqrt(r^2 + h^2)Curved area = pi r l; total area adds the base, pi r^2Source: MathWorld - ConeWikipedia - ConeNIST Guide to SI - Conversion factors. Last checked 5 November 2026.
What it is good for
- Instant updates as you type, no calculate button.
- Shows volume, litres, slant height, curved and total surface area.
- Runs in your browser; nothing is uploaded.
- Accepts base radius and vertical height only; it assumes a right circular cone.
- Capacity output is shown in litres; convert to other volume units yourself if needed.
Questions people ask
What formula does the calculator use for volume?
It uses V = (1/3) · π · r² · h where r is the base radius and h the perpendicular (vertical) height. This is the standard formula found on MathWorld and Wikipedia.
Can I enter diameter or slant height instead of radius and height?
This tool only accepts base radius and vertical height. To use a diameter divide it by two to get r. If you have slant height l, compute h = sqrt(l^2 - r^2) then enter h.
How does the litres output work and what about gallons?
The tool reports capacity in litres by converting cubic units to litres (1 L = 0.001 m3). For gallons convert litres using the appropriate factor: 1 US gallon = 3.785411784 L and 1 imperial gallon = 4.54609 L.
Does the formula work for oblique cones?
Yes, the volume formula uses the perpendicular height to the base so it still applies to oblique cones when you use the vertical height. This tool assumes a right circular cone and asks for the perpendicular height.
How accurate are the results?
Results are numeric estimates computed in your browser using standard floating point math. For engineering or legal uses you should apply your own rounding rules and official conversion factors from NIST or local authorities.
How do I find the radius from a known volume and height?
Rearrange the formula to r = sqrt((3V) / (π h)). Enter V in the same cubic unit as h and solve for r using a calculator or algebra software.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.