About the Blood Pressure Checker
This tool interprets a single blood pressure reading in three guideline systems and gives two common derived numbers. You type systolic and diastolic in mmHg and an optional pulse in bpm. Results update instantly as you type, and you can copy the result or share a link that reopens with your numbers. The tool runs entirely in your browser and sends no data to a server. It reports US categories from the AHA/ACC guideline, European categories from ESC 2024, and UK clinic thresholds from NICE NG136. It also calculates mean arterial pressure and pulse pressure using standard formulas. Use this for quick checks and to prepare for a conversation with a clinician. This is an estimate for general information, not medical advice.
How to use it
- 1Enter systolic blood pressure in mmHg
- 2Enter diastolic blood pressure in mmHg
- 3Optionally enter pulse in bpm
- 4Read US, European and UK categories plus MAP and pulse pressure
- 5Copy the result or share the link that reopens with your numbers
Worked example
Input: Systolic 182 mmHg, Diastolic 95 mmHg, Pulse 78 bpm. Results: US (AHA/ACC) severe (systolic >180), ESC 2024 hypertension (>=140/90), NICE clinic stage 2 (>=160/100), MAP 124.0 mmHg, Pulse pressure 87 mmHg, Pulse 78 bpm.
The formula
Inputs: Systolic (top number) (mmHg); Diastolic (bottom number) (mmHg); Pulse (optional) (bpm)Results shown: US category (AHA and ACC); European category (ESC 2024); UK clinic threshold (NICE); Mean arterial pressure; Pulse pressure; PulseMethod used: American Heart Association and American College of Cardiology categories (2017 guideline, kept in the 2025 guideline): normal under 120/80; elevated 120 to 129 and under 80; stage 1 hypertension 130 to 139 or 80 to 89; stage 2 hypertension 140/90 or higher; severe above 180 and/or 120When the two numbers fall in different categories, the higher one countsESC 2024 (Europe): non-elevated under 120/70, elevated 120 to 139 or 70 to 89, hypertension 140/90 or higherNICE NG136 (UK) clinic thresholds: stage 1 140/90, stage 2 160/100, severe 180/120Mean arterial pressure = diastolic + (systolic - diastolic) / 3Source: AHA/ACC guideline (2017, kept in 2025 guideline)ESC Guidelines 2024NICE NG136 Hypertension in adults. Last checked 7 November 2026.
What it is good for
- Instant interpretation across US, European and UK guidelines
- Calculates mean arterial pressure and pulse pressure for extra context
- Runs in your browser only and lets you copy or share a link
- One reading is not a diagnosis; use repeated readings or ABPM/HBPM for diagnosis
- This tool gives estimates for general information, not medical advice
Questions people ask
Is one high reading hypertension?
No. Diagnosis requires repeated elevated readings on separate days or ABPM/HBPM. Follow NICE or AHA guidance and consult a clinician for confirmation.
How should I measure my blood pressure at home?
Sit quietly for 5 minutes with back supported and feet flat. Use an upper arm cuff at heart level, take 2 readings one minute apart, and average them.
What is mean arterial pressure and why does it matter?
MAP estimates average arterial pressure during the cardiac cycle. The tool uses MAP = DBP + 1/3(SBP - DBP). Clinicians use MAP in critical care and perfusion assessment.
What is pulse pressure and when is it concerning?
Pulse pressure equals systolic minus diastolic. A persistently wide pulse pressure, for example over 60 mmHg, can reflect arterial stiffness and higher cardiovascular risk.
When is a reading an emergency?
Seek emergency care for readings at or above 180 systolic or 120 diastolic if you have symptoms like chest pain, breathlessness, weakness, or sudden vision loss.
Is my data uploaded or stored?
No. The tool runs entirely in your browser and does not send readings to a server. You can copy results or create a share link that encodes your numbers in the URL.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.