Free tools that run in your browser. Use any tool without an account.

Favourites Cart
Sign in
Join free

Dilution Calculator

  • Free
  • Runs in your browser
  • No account needed

Use C1xV1=C2xV2 to find the missing value. For example, to make 100 mL of 0.1 M from 1 M stock, V1 = (0.1×100)/1 = 10 mL of stock; add 90 mL solvent.

Answer
50 mL
Solvent to add
450 mL
Dilution factor
1 in 10

For acids, add the acid to the water, never water to the acid.

Runs in your browser. Your files and values are not sent to us. Report a problem
Advertisement

About the Dilution Calculator

This tool solves the dilution relation C1 x V1 = C2 x V2 in your browser. You enter the stock concentration, stock volume, final concentration and final volume, plus units. Results update instantly as you type; there is no calculate button. The tool shows the answer (V1 or C2 or V2 or C1), the solvent to add, and the dilution factor. You can copy the result or create a share link that reopens with your numbers. The calculator runs in the browser and does not upload your data. It is aimed at students, lab techs and anyone mixing solutions for class or simple lab work. The page reminds you that for acids you must add acid to water, never water to acid.

How to use it

  1. 1Enter three of the four values: C1, C2, V2 or V1.
  2. 2Choose matching concentration and volume units.
  3. 3Read the instant answer, solvent to add, and dilution factor.
  4. 4Copy the result or generate a share link to reopen your numbers.
Advertisement

Worked example

Inputs: C1 = 1 M, C2 = 0.05 M, V2 = 250 mL. Result: Answer (V1) = 12.5 mL of 1 M stock. Solvent to add = 237.5 mL. Dilution factor = 20.

The formula

C1 x V1 = C2 x V2: the amount of solute stays the same when you add solventSo V1 = C2 x V2 / C1, C2 = C1 x V1 / V2, V2 = C1 x V1 / C2 and C1 = C2 x V2 / V1Solvent to add = V2 - V1Use the same units on both sides

Source: OpenStax - Chemistry 2e, section 3.3 Molarity (dilution)IUPAC Gold Book - amount (of substance) concentration. Last checked 6 November 2026.

What it is good for

  • Instant live results as you type
  • Shows solvent to add and dilution factor
  • Runs fully in your browser, nothing uploaded
  • Does not plan serial dilution chains
  • Does not convert mass to molarity without extra data like molecular weight
Advertisement

Questions people ask

What formula does the calculator use?

The calculator uses C1 x V1 = C2 x V2, the standard dilution relation. OpenStax explains this formula and how to rearrange it for the unknown.

Which units should I use?

Use the same units on both sides, for example mL with mL or L with L. Make sure concentration units match, for example M with M or % with %.

Can I mix percent and molarity values?

Not directly. Percent and molarity are different units. Convert one to the other first, which may need molecular weight and density data for accurate conversion.

What if V1 is too small to pipette accurately?

If V1 is impractically small, plan a serial dilution using the same C1V1=C2V2 formula for each step. Use larger transfer volumes to keep pipetting accurate.

Is my data uploaded or stored by FreeToolr?

No. The calculator runs in your browser and does not upload input data. You can copy results or generate a share link that saves numbers in the link.

Are there safety notes for acids or bases?

Yes. For acids, always add acid to water, never water to acid. The tool also shows solvent to add so you can plan safe mixing steps.

Help keep every tool free

FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.

Advertisement
Advertisement