About the Frequency Converter
This tool converts frequency values between common units: Hertz, kilohertz, megahertz, gigahertz, terahertz, revolutions or beats per minute, radians per second, and degrees per second. You use a single numeric input and choose the unit. Results appear instantly as you type and a swap button flips the from and to unit. The tool runs entirely in your browser; you do not upload data to a server. Conversion factors follow the SI definitions and authoritative sources such as the BIPM and NIST. That means decimal SI prefixes are exact, and angular conversions use the exact 2 times pi factor. The interface also shows a full table with every unit at once so you can copy or download the row you need.
How to use it
- 1Type the numeric value into the input field.
- 2Select the unit you are converting from.
- 3Watch the full conversion table update instantly as you type.
- 4Use the swap button to invert from and to units if needed.
- 5Copy or download the table row you want.
Worked example
Input: 50 Hz Outputs (exact): Hz = 50 Hz kHz = 0.05 kHz MHz = 0.00005 MHz GHz = 5e-8 GHz THz = 5e-11 THz rpm = 3000 rpm rad/s = 100 * pi rad/s = 314.1592653589793 rad/s deg/s = 18000 deg/s
How it works
Use exact SI factors and angular relations:
1 kHz = 1000 Hz
1 MHz = 1 000 000 Hz
1 GHz = 1 000 000 000 Hz
1 THz = 1 000 000 000 000 Hz
rpm = Hz * 60 ; Hz = rpm / 60
angular frequency omega (rad/s) = 2 * pi * f (Hz)
period T (s) = 1 / f (Hz)
Note: rpm conversion assumes one cycle equals one revolution unless otherwise statedSource: BIPM SI Brochure (unit definitions)NIST Reference on Units and Constants. Last checked 5 November 2026.
What it is good for
- Instant updates as you type so you see results immediately.
- Uses exact SI and BIPM definitions for decimal prefixes and angular conversions.
- Runs in your browser only; no data upload is required.
- Does not compute electromagnetic wavelength from frequency using the speed of light.
- RPM conversion assumes one cycle equals one revolution; check motor or system specifics for synchronous assumptions.
Questions people ask
How do I convert Hz to kHz?
Divide by 1 000. For example, 5 000 Hz becomes 5 kHz. This uses the exact SI prefix factor of 10^3 as defined by BIPM.
How do I convert Hz to radians per second?
Multiply frequency in Hz by 2 times pi. So omega = 2 * pi * f. For 1 Hz omega is about 6.283185 rad/s per the SI angular relation.
What does rpm mean when I convert it to Hz?
rpm counts revolutions per minute. Use rpm = Hz * 60 and Hz = rpm / 60. This assumes one cycle equals one revolution, which is valid for synchronous motion.
Can I enter negative frequencies?
Physical frequency as a count is nonnegative. The tool will treat negative input values as signed numbers for math, but negative frequency has meaning mostly in signal math, not as a physical count.
Does the converter send my inputs to a server?
No. The tool runs in your browser and performs conversions locally. Nothing is uploaded to a server when you use the converter.
Are kHz, MHz and GHz conversions exact?
Yes. SI prefixes are exact decimal factors (1 kHz = 1000 Hz, 1 MHz = 1 000 000 Hz). Angular and rpm conversions use exact arithmetic with pi and 60.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.