About the Density Converter
Use this Density Converter to change a density number from one mass per volume unit to another. You get instant results as you type, a swap button, and one-line output plus a table that shows the value in every unit the tool supports. The converter works entirely in your browser after the page loads, so you do not upload data to a server. It uses exact SI and NIST conversion factors, with kg/m3 as the anchor. Engineers, lab techs, students and buyers use it when they need quick unit checks between kg/m3, g/cm3, g/mL, kg/L, g/L, mg/L, lb/ft3, lb/in3, oz/in3, lb/US gal and lb/UK gal. The tool gives a full table and copyable result, which is often faster than manual factor work.
How to use it
- 1Enter the numeric density value in the input box.
- 2Choose the From unit and the To unit from the drop lists.
- 3Watch the result update instantly as you type.
- 4Use the Swap button to flip the From and To units.
- 5Copy or save the full table of every unit if needed.
Worked example
Input: 1 g/cm3. Result table: 1000 kg/m3; 1 g/cm3; 1 g/mL; 1 kg/L; 1000 g/L; 1,000,000 mg/L; 62.42796 lb/ft3; 0.03612729 lb/in3; 0.5780366 oz/in3; 8.345404 lb/US gal; 10.02241 lb/UK gal.
How it works
ρ_target = ρ_input × factor_from ÷ factor_to where factor_from and factor_to are the multipliers that convert each named unit to kg/m3Source: BIPM - The International System of Units (SI Brochure)NIST Special Publication 811 - Guide for the Use of the International System of Units. Last checked 5 November 2026.
What it is good for
- Instant, in-browser conversion with no upload.
- Shows the value in every supported unit at once.
- Uses exact SI and NIST numeric factors for repeatable results.
- No temperature compensation or specific gravity correction for liquids and gases.
- No batch CSV import or audit export in this basic tool.
Questions people ask
What is density?
Density equals mass divided by volume and the SI unit is kilogram per cubic metre (kg/m3). See the SI brochure or NIST guide for definitions.
Is g/mL the same as g/cm3?
Yes. One millilitre equals one cubic centimetre, so 1 g/mL equals 1 g/cm3. Both equal 1000 kg/m3.
How do I convert g/cm3 to kg/m3?
Multiply by 1000. For example 0.85 g/cm3 equals 850 kg/m3. The tool does this automatically using SI factors.
Which gallon does the tool use?
The tool shows both US and UK gallons. US liquid gallon is 3.785411784 L and the Imperial gallon is 4.54609 L.
Does temperature affect density?
Yes. Liquids and gases change density with temperature, sometimes a lot. Use density measured at a reference temperature or apply a separate temperature correction.
Can I convert many values at once or upload a file?
This tool converts single values interactively. If you need batch CSV or audit export, use a specialist batch tool or a spreadsheet with the same factors.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.