About the Data Transfer Rate Converter
This tool converts data transfer rates between bits per second and bytes per second using both SI (decimal) prefixes and IEC (binary) prefixes. You can convert units such as bps, kbps, Mbps, Gbps, Tbps, B/s, kB/s, MB/s, GB/s, KiB/s, MiB/s and GiB/s. It updates instantly as you type, offers a swap button, and shows a table with the value in every unit. The page runs entirely in your browser after loading, so nothing you enter is uploaded to a server. Use it to translate ISP speeds into bytes per second, compare advertised Mbps to file transfer rates, or check binary versus decimal results. The tool uses exact SI and NIST conversion factors so results match the official definitions from BIPM and NIST.
How to use it
- 1Enter the numeric value you want to convert.
- 2Choose the unit you are converting from and the unit you want to convert to.
- 3Use the swap button to flip from and to units if needed.
- 4See instant results plus a full table showing the value in every supported unit.
Worked example
Input: 100 Mbps (decimal megabits per second). Results: 100,000,000 bps; 100,000 kbps; 0.1 Gbps; 12,500,000 B/s; 12,500 kB/s; 12.5 MB/s; 0.0125 GB/s; 11.920928955078125 MiB/s; 0.011636734008789062 GiB/s.
How it works
Converts data rate (bit per second) between: Bits per second, Kilobits per second (kbps), Megabits per second (Mbps), Gigabits per second (Gbps), Terabits per second, Bytes per second, Kilobytes per second (kB/s), Megabytes per second (MB/s), Gigabytes per second (GB/s), Kibibytes per second (KiB/s), Mebibytes per second (MiB/s), Gibibytes per second (GiB/s)Shows the result instantly as you type (no convert button), a swap button and a table of the value in every unitUses exact SI and NIST conversion factorsSource: BIPM SI prefixesNIST on binary prefixes. Last checked 5 November 2026.
What it is good for
- Instant live results as you type
- Full table with both SI and IEC units
- Runs in your browser, no data upload
- Does only unit conversion; it does not measure actual network throughput.
- Download time estimates will ignore protocol overhead and network effects.
Questions people ask
What is the difference between Mbps and MB/s?
Mbps means megabits per second, with a lowercase b for bits. MB/s means megabytes per second, with an uppercase B for bytes. One byte equals 8 bits, so divide Mbps by 8 to get MB/s.
When should I use 1,000 versus 1,024?
Use 1,000 for SI decimal prefixes such as kbps, Mbps and Gbps. Use 1,024 for IEC binary prefixes such as KiB, MiB and GiB. The NIST and BIPM pages explain these definitions.
Will this tool tell me my real download speed?
No. This tool converts units only. Real download speed depends on network congestion, protocol overhead, Wi Fi performance and server limits. Use a speed test to measure your actual throughput.
How do I convert Mbps to MiB/s exactly?
Convert Mbps to bits per second using 10^6, divide by 8 to get bytes per second, then divide by 2^20 to get MiB/s. For example, 100 Mbps = 12,500,000 B/s = 11.920928955078125 MiB/s.
Does the tool send my input to a server?
No. The converter runs in your browser after the page loads. Nothing you type is uploaded to a server unless you use an explicit share or save feature that asks for permission.
Can I convert large units like Tbps or GiB/s?
Yes. The tool supports terabits per second and binary units up to GiB/s. It uses exact SI and IEC factors so large unit conversions follow the same rules as smaller units.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.