About the Tile Calculator
This Tile Calculator estimates how many tiles, boxes and cost you need for a rectangular area. You enter room length and width in metric or imperial. Enter tile length and width in cm or inches. Set the grout joint and extra percent for cuts and breakage. You can optionally enter tiles per box and price per tile and pick USD, GBP, EUR, NGN, AED, SAR or INR. Results update instantly in your browser as you type. Nothing is uploaded to a server. You can copy results or share a link that reopens with your numbers. The math uses tile footprint plus grout, adds your waste percent, and rounds up to whole tiles and boxes. Treat outputs as planning estimates.
How to use it
- 1Enter area length and width and pick Metric or US/imperial units.
- 2Enter tile length and width in cm or inches and add grout joint in mm or in.
- 3Set extra for cuts and breakage as a percent and add tiles per box and price if available.
- 4Read tiles needed, tiles without waste, area, boxes to buy and cost; copy or share the link.
Worked example
Inputs: Area 5.0 m by 4.0 m, Tile 30 cm by 30 cm, Grout 3 mm, Extra 10%, Tiles per box 20, Price per tile 1.50 USD. Results: Area 20.00 m2, Tiles without waste 218, Tiles needed 240, Boxes to buy 12, Cost 360.00 USD.
The formula
Each tile covers (tile length + grout joint) x (tile width + grout joint)Tiles = area / covered area per tile, then x (1 + waste % / 100), rounded upBoxes = tiles / tiles per box, rounded upSource: Ceramic Tile Education Foundation / TCNABritish Standards development (BSI) project page. Last checked 13 November 2026.
What it is good for
- Instant results as you type, no calculate button.
- Supports metric and US/imperial units and listed currencies.
- Copyable results and a sharable link that reopens with your inputs.
- Single rectangular area per run; split complex rooms and add areas manually.
- Outputs are planning estimates; verify measurements and supplier coverage for final orders.
Questions people ask
Do I include grout joint in the tile size?
Yes. The calculator adds the grout joint to both tile length and width before computing a tile's covered area. This reduces underestimates from grout gaps.
How much extra should I add for waste?
Common trade guidance is about 10% for straight fits, 12 to 15% for offset or diagonal patterns, and 15 to 20% for complex patterns. Choose a higher percent for irregular rooms.
How does the tool round boxes and tiles?
The calculator rounds up to whole tiles after you apply waste percent. Boxes are rounded up to whole boxes based on tiles per box.
Can I use the tool for odd shapes or rooms with cutouts?
The tool accepts one rectangular area. For odd shapes, split the floor into rectangles, calculate each area, then add results yourself or run the tool multiple times.
Is my data stored or uploaded?
No. Calculations run in your browser only. Nothing is uploaded to a server. You can copy results or create a sharable link that encodes your inputs.
How accurate are the cost estimates?
Cost is an estimate that uses the price per tile you enter. For final budgeting, check supplier box coverage and current prices.
Help keep every tool free
FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.