Free tools that run in your browser. Use any tool without an account.

Favourites Cart
Sign in
Join free

Deck Calculator

boards, joists and screws

  • Free
  • Runs in your browser
  • No account needed

You need 28 boards, 7 joists and 392 screws for a 2.5 m by 3.2 m deck using 120 mm boards, 5 mm gap, 3.6 m board length, 400 mm joist spacing and 10% waste.

Deck boards
33
Deck area
20 m2
Rows of boards
28
Joists
14
Deck screws (2 per board at each joist)
784

Framing (beams, posts and footings) depends on spans and loads: check your local building code or a span table before you build.

Runs in your browser. Your files and values are not sent to us. Report a problem
Advertisement

About the Deck Calculator

This tool is a quick, browser-run deck planner for DIYers and pros who need board counts fast. You enter units, deck length and width, board width, gap, board length, joist spacing and waste percent. The calculator shows deck boards, deck area, rows, joists, estimated screws and an optional board cost. Results update instantly as you type and the page keeps nothing you upload. You can copy results or share a link that reopens with your numbers. The calculator uses simple, transparent formulas so you can verify every number. It does not size beams, posts or footings. Always check local building codes or a span table before building.

How to use it

  1. 1Choose Metric or US units and enter deck length and deck width.
  2. 2Enter board face width, gap, board stock length, joist spacing and waste percent.
  3. 3See rows, deck run, board count, joists, screws, deck area and optional cost instantly.
  4. 4Copy results or create a shareable link that reopens with your inputs.
Advertisement

Worked example

Inputs: units Metric; deck length (boards run) 4.0 m; deck width 3.0 m; board width 140 mm; gap 5 mm; board length 3.6 m; joist spacing 400 mm; waste 10%. Results: Rows = 21, Deck run = 84.0 m, Deck boards = 26, Joists = 11, Deck screws = 462, Deck area = 12.0 m2.

The formula

Rows = deck width / (board width + gap), rounded upBoard run = rows x deck lengthBoards = run x (1 + waste %) / board length, rounded upJoists = length / joist spacing, rounded up, + 1Screws = rows x joists x 2

Source: International Residential Code, see Table R507.6AWC DCA-6 Prescriptive Residential Wood Deck Construction Guide. Last checked 13 November 2026.

What it is good for

  • Instant, in-browser results as you type.
  • Transparent, easy to verify formulas.
  • Shareable links that reopen with your inputs.
  • Does not size beams, posts or footings; check local code or span tables.
  • Cost numbers are a simple item cost estimate, not a full project quote.
Advertisement

Questions people ask

How does the calculator count rows?

It divides deck width by board face width plus gap and rounds up. That gives the number of full board rows across the deck.

How many screws does it assume per board crossing?

It assumes two screws per board at each joist crossing. Total screws = rows times joists times two.

What waste percentage should I use?

Typical waste for a straight lay is about 10 percent and for diagonal layouts around 15 percent. Check your product instructions for manufacturer recommendations.

Does the tool check joist spans against code?

No. The calculator counts joists but does not pick joist sizes or check spans. Use the IRC Table R507.6 or your local code to select joist size.

Can I save or share my numbers?

Yes. You can copy results and create a shareable link that reopens with your inputs. No files are uploaded to use the tool.

Are cost results accurate for final budgeting?

Cost outputs are planning estimates only. For final prices get local supplier quotes and include labor and permits.

Help keep every tool free

FreeToolr stays free because people help it grow. Share a tool you like, tell us what to build next, or support us on Ko-fi.

Advertisement
Advertisement